Step-by-step Guide to Installing a New Shower Unit

Step-by-step Guide to Installing a New Shower Unit

Blog Article

Schedule Services

What are your ideas on How to Build a Shower Enclosure for Your DIY Bathroom?

A successful shower installation requires cautious preparation and also a lot of job. Most of the times, you will certainly need to do 3 kinds of tasks: mounting wall surfaces, mounting the plumbing, as well as ending up walls.

Prep work

To start with, you have to select the sort of shower that you wish to mount. It is very important to establish whether the selected shower can managing certain systems and can manage a secure degree of water with the central heating boiler. A lot of shower units nowadays are developed to be flexible to various water pressures (such as stored hot water and cool mains).
It is also important to take into consideration the water pressure and the preparation of the piping as well as drainage for the shower

Various Sorts Of Shower Units

Push-on Mixer: The pipe and also spray parts of the push-on mixer shower unit can be linked to the bathroom tap based on your need, as well as the water temperature can be changed via the faucets. Push-on mixers are cheap and very basic to mount. Nevertheless, although the hose connection is straightforward, it is conveniently removed. In addition, it is bothersome to adjust the temperature.

Bath/Shower Mixer: The hose and spray of this sort of shower are combined with a bathroom mixer faucet, as well as the temperature can be readjusted via the bath taps. It is a very low-cost choice and no additional plumbing is included. Nonetheless, the bath/shower mixers likewise deal with bothersome temperature control choices.

Handbook Mixer: The hose and also spray of a hand-operated mixer shower system belong of the wall unit as well as the hot and cold water supplies are connected to a solitary valve The temperature and stress of the water are controlled via either one or a variety of handles (in extra pricey showers). Although temperature level control is much easier in hands-on mixer kinds, they are more expensive than the formerly mentioned mixers. They also need additional plumbing of cold and hot supply of water pipes.

Thermostatic Mixer: The tube and spray of this shower kind are a part of the wall surface unit and the hot and cold water products are attached to a solitary valve here also. It is full with a built-in stabiliser to self-adjust the water temperature level and to prevent it from coming to be too hot. One of the largest advantages of a thermostatic mixer shower kind consists of practical temperature level control. However, it is the most costly of the various mixer options.

Power Shower: A power shower is a single device having a powerful electric pump that is capable of changing both the water pressure as well as temperature level. This sort of shower can be fitted if there is water from a cold water cistern as well as a hot water cyndrical tube. A power shower makes the modification of both pressure and also temperature level easy. On the other hand, it is unsuitable for water heated up directly by the shower or where the water is supplied by a combination boiler under mains stress.

Electric Shower: An electric shower is plumbed into a keys cold water supply as well as it heats the water electrically. It is necessary to note that for this shower type to be set up, the keys pressure needs to be at least 0.7 kg/sq cm (10lb/sq in). The system allows the temperature as well as pressure to be changed via a knob. Versions with temperature level stabilisers are better as they remain untouched by other taps in other places being used within the household. A significant downside of electric showers is that the control handle just enables the choice of high temperatures at less pressure, or reduced temperatures at a higher stress. This is troublesome in the winter season when the spray is often weak as well as the keys water is colder. Nevertheless, this problem is dealt with in some designs which are available with a winter/summer setup.

Method

Depending on the type of shower you want to set up, the shower head have to either be suited order to avoid its contact with the water in the bathroom below or the base tray, or it should have a check valve.
Before starting, it is suggested to mark the settings of the shower head and control, and also to prepare the pipe-work involved. In addition, the drain system to remove the waste water will certainly need to be planned. Both positions of the cable route and the shower switch will likewise require to be thought about if a rapid or electric shower unit is being mounted.
Utilize the direction guide offered with the shower device to fit the shower control.Before suitable the pipelines that will provide the water to the shower system, it is necessary to cut off the supply of water. In order to secure the pipelines, they must be given a waterproof covering and likewise fitted with separating shutoffs. The pipelines can after that be buried into the wall surface and also glued over to neaten the overall appearance.
Fit the base tray, shower head, and fittings.
Connect the primary shower control to the pipelines that will certainly be supplying the water (This might call for a female screw string adapter).
Reconnect the water supply and examination the pipelines for any type of leaks, as some might need tightening up.
If you are mounting an electric shower, keep in mind to turn off the electrical energy supply before making any electrical connections. As soon as these links have actually been made (there must be assistance within the user's manual), the power supply can be switched over back on.

Changing Water Pressure to Suit Your Shower

The cold water tank can be raised to a better height (often as little as 150mm (6inches)) by fitting a solid wooden support beneath it - possibly made up of struts and also blockboards. If you select this choice, the primary and also circulation pipelines will certainly additionally have to be elevated to meet the new elevation of the tank.
Additionally, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is chosen, it should be connected right into the power supply in order to operate.

Piping as well as Water drainage

It is best to utilize 15mm diameter supply pipelines, and make the go to the shower as brief and straight as feasible so as to preserve optimal pressure and also minimise warmth loss. In addition, by reducing the use of joints for pipeline edges, you can reduce the resistance in the circulation of the water system. You can attain this by bending the pipelines rather.

A Lot Of Typical Mistakes

Going against or disregarding neighborhood code constraints.

Utilizing pipes that are too little.

Connecting copper to galvanized without utilizing a brass or dielectric fitting between the two.

Not making use of tape or pipeline compound at threaded joints.

Uneven your fixtures when installing them.

Not installing an air gap filling for components.

Reducing supply stub outs too short to set up the shutoff valves onto after the finished wall surface is in area.

Not effectively lining up tubing right into fittings or quit valves. (Forcing the nut onto the compression ring at an angle when the tubing is at an angle will certainly create a leak.).

When turning the water back on in your home, constantly run the outside pipe shutoff or purge your toilets to hemorrhage dust as well as air from the lines. This debris can cause issues in your sink faucets and also other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

Do you really like reading about How to Install a One-Piece Shower Unit? Put a comment directly below. We would be interested to see your feelings about this entry. We hope that you come back again soon. Enjoyed our review? Please share it. Let somebody else discover it. I appreciate reading our article about How to Build a Shower Enclosure for Your DIY Bathroom.

Book Your Installation

Report this page